Screws for Anchors
Countersunk Phillips screws supplied to match our wall plugs and anchors. Sharp point and deep thread drive cleanly into wood, drywall and plastic without pre-tapping — order them together with the plugs so every fixing point is covered.
| Size | M3.5 / M3.9 / M4.2 / M4.8 / M6 |
|---|---|
| Length | 16–100 mm |
| Material | SS304 / SS410 (others on request) |
| Head | Phillips countersunk (flat) |
| Drive | PH1 / PH2 |
| Application | Wood, drywall, plastic, with nylon plugs |
| Packaging | Box / bulk carton |
| MOQ | 100,000 pcs per size |
About the Screws for Anchors
An anchor is only as good as the screw going into it, and mismatched screws are the most common reason a plug lets go. These countersunk Phillips screws are supplied to match our plugs and anchors, in stainless so the head does not rust and stain the finished face after a season outside.
Typical applications
- With nylon plugs and anchors — Colour-matched sets for retail and site packs.
- Exterior and wet areas — Facade brackets, cladding and bathroom fittings where plated screws rust.
- Wood, board and plastic — Sharp point and deep thread drive without pre-drilling in most soft materials.
How to choose the right specification
- SS304 or SS410 — 304 for general exterior use, 410 for indoor and non-corrosive applications at a lower cost.
- Length by fixing depth — Add the fixture thickness to the anchor embedment — a screw that bottoms out will never tighten.
- Head type — Countersunk for flush finish in wood and board; pan head where the fixture needs a wider bearing face.
Supply, packing and OEM
Box or bulk carton, 100,000 pcs per size per size. Screw and plug kits are packed to order, so your customers get a matched set rather than guessing at the hardware counter.
Standard packing is box / bulk carton, minimum order 100,000 pcs per size per size, with mixed sizes accepted on a first order. Bulk orders typically ship within 25–40 days after deposit, FOB Shanghai or Ningbo — about 2.5 hours from our workshop in Danyang.
Most of this item ships to Canada, Europe, Australia, Japan, the Middle East and South America. Tell us the destination market and we match the sizes, thread standard, marking and packing language it uses — metric for Europe, Japan and South America, imperial where the trade still buys in inches, and carton copy in the language your customers read — then quote FOB, CIF or DDP against your order size.
Related products: nylon wall plug, conical expansion plug, Wedge Anchor Expansion Bolt.
More from Expansion Bolts & Anchors
Request a quotation for Screws for Anchors
Tell us sizes, quantity and destination port — pricing and samples within 24 hours.